Epson WorkForce Pro WP-4010 manual

Epson WorkForce Pro WP-4010
6.4 · 1
PDF manual
 · 4 páginas
manualEpson WorkForce Pro WP-4010

Start Here

4 Slide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge guides.5 Gently insert the paper cassette.
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
6 Extend the output tray and raise the paper stopper as shown. (Do not raise the paper stopper for legal-size paper.)
Install software
Note: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website (see “Epson technical
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
1 Make sure the printer is NOT CONNECTED to a computer.
: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable. You can’t install your
software that way.
2 Insert your product CD.Read these instructions before using your printer.
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and plastic inside the printer.
Turn on1 Connect the power cord to the back of the printer and to an electrical outlet.
Caution: Do not connect to your computer yet.
2 Press the power button.
Install ink cartridges
1 Open the front cover.2 Unpack the four ink cartridges.3 Shake each cartridge as shown for about 5 seconds.4 Install each cartridge in the correct slot for its color. Push each cartridge in until it clicks.5 Close the front cover.The printer starts priming the ink. This takes about 12 minutes. When the green power light stops flashing, priming is complete.
Note: The included cartridges prime the printer and print about 1000
black pages/900 color pages. Actual page count will vary.
Caution: Don’t turn off the printer or open the cover while it is
priming or you’ll waste ink.
Load paper in the cassetteYou can load letter-, A4-, or legal-size plain paper in the cassette. For instructions on loading envelopes and special paper in the rear MP tray, see the online User’s Guide.1 Pull out the paper cassette.2 Slide the edge guides outward, and position them for the size of paper you are using.
Note: If you are loading legal-size paper, extend the cassette as
3 Insert the paper with the glossy or printable side facedown.
Note: Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.


Pro WP-4010 Series


Ver el manual de Epson WorkForce Pro WP-4010 aquí, gratis. Este manual pertenece a la categoría Impresoras y ha sido calificado por 1 personas con un promedio de 6.4 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre Epson WorkForce Pro WP-4010 o necesitas ayuda? Haz tu pregunta aquí

¿Necesitas ayuda?

¿Tiene alguna consulta sobre el Epson WorkForce Pro WP-4010 y la respuesta no está en el manual? Haga su consulta aquí. Proporcione una descripción clara y completa de su problema y su consulta. Cuanto mejor describa su problema y consulta, más fácil será para otros propietarios de Epson WorkForce Pro WP-4010 proporcionarle una buena respuesta.

Número de preguntas: 0

Epson WorkForce Pro WP-4010 especificaciones

A continuación encontrará las especificaciones del producto y las especificaciones del manual del Epson WorkForce Pro WP-4010.

Marca Epson
Modelo WorkForce Pro WP-4010
Producto Impresora
EAN 10343889538, 792285502293
Idioma Inglés
Tipo de archivo Manual de usuario (PDF)

Preguntas frecuentes

¿No puede encontrar la respuesta a su consulta en el manual? Puede encontrar la respuesta a su consulta en las preguntas frecuentes sobre el Epson WorkForce Pro WP-4010 más abajo.

¿No aparece tu pregunta? Haz tu pregunta aquí

No hay resultados