Name: Ikelite 4066.1
Brand: Ikelite
SKU: 295053
Rating: 54 (1 reviews)

manualIkelite 4066.1

IIKKEELLIITTEE SSMMAARRTT CCHHAARRGGEERR ##44006666..11

The Ikelite Smart Charger #4066.1 is a variable input voltage charger that automatically adjusts to

the voltage of the power source (100V to 240V). This feature allows it to easily adapt to currents

that fluctuate in places with poorly regulated power. The charger offers “trickle-style” maintenance;

this allows it to continuously charge the battery pack of the Subsrobe or flashlight safely. The

charger also prolongs battery life, eliminates any possibility of battery memory, and accepts

interchangeable plugs for worldwide use.

The Ikelite Smart Charger #4066.1 is only compatible with the NiCad and NiMH battery packs

offered by Ikelite for the following products:

• Substrobe DS125, DS160, DS161 recharge time: 1.5 hours

• Substrobe DS200 recharge time: 2.5 hours

• Substrobe 100A, Ai recharge time: 4 hours

• Substrobe 150, 225 recharge time: 5 hours (May require Socket Adapter #4063.51)

• Substrobe 300, 400 recharge time: 5 hours (May require Socket Adapter #4063.51)

• Super C-Lite HR recharge time: 2.5 hours

• RCD HR recharge time: 4 hours

• RCD Super-8R recharge time: 5 hours

• Modular Super-Lite recharge time: 5 hours (Newer battery packs only)

• Modular Video-Lite recharge time: 5 hours (Newer battery packs only)

SSoocckkeett AAddaapptteerr ##44006633..5511::

Substrobe models 150, 225, 300, and 400 with the older style battery

pack require purchase of the Socket Adapter #4063.51. This allows the Smart Charger to connect to

the charger socket on the bottom of the older battery packs. Newer battery packs for these strobes

do not need this adapter, as the proper charger socket is located on top of the battery pack.

UUSSIINNGG TTHHEE CCHHAARRGGEERR PPLLUUGGSS________________________________________________________________________________________________

The Ikelite Smart Charger #4066.1 comes packaged with four interchangeable AC adapter plugs

for the following electrical regions: USA, European, United Kingdom, and Australian. Choose the

appropriate AC adapter plug for your location and slide the chosen adapter into the back of the

charger; it should snap into position.

To change the plug, press up on the adapter plug to unsnap it from the back of the charger. Slide

another AC adapter plug into position.

NNoottee::

Charger cords (#0171.61, #0171.62, #0171.63) for the original Smart Charger #4063.1 are

not compatible with the Smart Charger #4066.1.

CCHHAARRGGIINNGG TTHHEE BBAATTTTEERRYY PPAACCKK____________________________________________________________________________________________

WWaarrnniinngg:: DDoo nnoott

attempt to charge a battery pack when it is wet. Electrical shock, injury, or fire

could occur. Make sure all components are completely dry.

Always turn the unit off before recharging. Charge the battery pack after purchase and recharge

after each use. Store the battery pack fully charged. Remove it from storage every few months and

fully recharge it. Refer to the product recharge times listed on the opposite page and read “Indicator

Lights” for more details on charging times.

CCaauuttiioonn::

• Do not completely drain (fully discharge) the battery pack. Fully discharging the batteries will

shorten the battery pack’s life.

• The battery pack is factory sealed. Do not disassemble. Disassembly will void your Ikelite

product’s limited warranty.

IINNDDIICCAATTOORR LLIIGGHHTTSS__________________________________________________________________________________________________________________

IInnddiiccaattoorr LLiigghhtt oonn BBaatttteerryy PPaacckk

The Substrobe 100A, 200, RCD HR, and Super-8R feature an indicator light on the battery pack

which will light up to show that a charge is being accepted; the light does not go out once the

batteries are fully charged.

NNoottee::

For all other Ikelite products, either there is no indicator light on the battery pack or the

indicator light on the battery pack will not light up when using the Smart Charger.

IInnddiiccaattoorr LLiigghhtt oonn SSmmaarrtt CChhaarrggeerr

The indicator light on the Smart Charger is located on the front of the charger near the bottom.

It illuminates once the charger is connected to both the electrical outlet and the battery pack. It

shows the battery pack’s present state of charge. There are three states of charge.

RRaappiiddllyy bblliinnkkiinngg lliigghhtt

Indicates that the battery pack was almost completely drained (discharged) and that the pack

is being slow-charged to restore the batteries. Once the batteries reach an acceptable level, the

charger will automatically switch to the quick-charge mode.

CCoonnttiinnuuoouuss lliigghhtt

Indicates that the battery pack is being quick-charged.

SSlloowwllyy bblliinnkkiinngg lliigghhtt

Indicates that the battery pack is fully recharged and that the charger is now providing a

“trickle-style” maintenance charge. This allows the pack to remain safely plugged into the outlet

via the charger for extended periods of time.

IIKKEELLIITTEE LLIIMMIITTEEDD WWAARRRRAANNTTYY________________________________________________________________________________________________

All Ikelite products are warranted against any manufacturing defects for a period of one year

from the original date of purchase. Defective products should be returned prepaid to Ikelite. Ikelite

will, at its discretion, repair or replace such products, and will return to customer prepaid. All other

claims, of any nature, including, but not limited to, bulb failure, are not covered. Except as men-

tioned above, no other warranty, expressed or implied, applies to this Ikelite product.

IIKKEELLIITTEE UUNNDDEERRWWAATTEERR SSYYSSTTEEMMSS

50 West 33rd Street

Indianapolis, IN 46208 USA

317-923-4523

wwwwww..iikkeelliittee..ccoomm

Email: ikelite@ikelite.com

4066.1-06-1209

Manual

Ver el manual de Ikelite 4066.1 aquí, gratis. Este manual pertenece a la categoría Cargadores de bateria y ha sido calificado por 1 personas con un promedio de 5.4 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre Ikelite 4066.1 o necesitas ayuda? Haz tu pregunta aquí

¿Necesitas ayuda?

¿Tiene alguna consulta sobre el Ikelite 4066.1 y la respuesta no está en el manual? Haga su consulta aquí. Proporcione una descripción clara y completa de su problema y su consulta. Cuanto mejor describa su problema y consulta, más fácil será para otros propietarios de Ikelite 4066.1 proporcionarle una buena respuesta.

Número de preguntas: 0

Ikelite 4066.1 especificaciones

A continuación encontrará las especificaciones del producto y las especificaciones del manual del Ikelite 4066.1.

General

Marca	Ikelite
Modelo	4066.1
Producto	Cargador de bateria
EAN	883711036076, 0883711036076
Idioma	Inglés
Tipo de archivo	Manual de usuario (PDF)

Otras características

Composición química	Ni-Cd / NiMH
Dimensiones (Ancho x Profundidad x Altura)	69 x 104 x 38 mm

Diseño

Color del producto

Negro

Preguntas frecuentes

¿No puede encontrar la respuesta a su consulta en el manual? Puede encontrar la respuesta a su consulta en las preguntas frecuentes sobre el Ikelite 4066.1 más abajo.

¿No aparece tu pregunta? Haz tu pregunta aquí

No hay resultados